- 37 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device only
in case of compliance!
Connect the device only to properly installed single socket with protective
terminal.
The first connection to the power supply should be realized by the qualified
electrician, user is responsible for further connections.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
The socket must be easily accessible for the user so it it possible to quickly
disconnect the device from the power supply when necessary.
5.2 Operation
Preparation of the device
Disassemble the device before use and clean all parts according to
section
6 "Cleaning and maintenance"
. After cleaning reassemble the device and
make sure that all parts have been assembled.
Start-up of the device
In order to start the device it is required to:
Make sure that
ON/OFF
switch is turned off.
Remove the cover from the water tank.
NOTE!
In order to maintain the reliability of device operation
pour only filtered water to the tank.
Fig. 2
