Pag. 17
TECHNICAL SPECIFICATIONS TABLE FOR CATEGORY II2H3+ GAS FRYERS
THE MANUFACTURER RESERVES THE RIGHT TO WITHOUT NOTICE MODIFY THE FEATURES OF THE
APPLIANCES DESCRIBED IN THIS MANUAL.
THE MANUFACTURER ACCEPTS NO RESPONSIBILITY FOR HARM CAUSED BY INCORRECT INTERVEN-
TIONS, TAMPERING WITH THE APPLIANCE, MISUSE, POOR MAINTENANCE, NON-COMPLIANCE WITH
CURRENT REGULATIONS AND INEXPERT USE.
3.3 CONTROL AND SAFETY DEVICES
If the appliance is not used for a long time or if it does not work or works irregularly, the gas stopcock upstream
of the appliance must be shut off.
All the parts of the appliance that are subject to wear can easily be accessed from the front of the appliance by
opening the door or after removing the front.
All the couplings use a dado and bicono, so great care must be taken in handling these components. If the part
is damaged during dismantling or reassembly it must be replaced with a new one.
If the oil exceeds the set temperature the safety thermostat breaks the contact with the thermocouple. To restart
the appliance, open the door and press the red pusch-button.
Warning. As the safety thermostat may have been triggered by a faulty gas valve or thermostat, any faulty parts
must be replaced by an authorised technician before the appliance is started up again.
Mod.
Rated
Output
Tank
Capacity
Pressure in mbar
G30/G31 = 30/37
G20 = 18/20
Primary
Air
NOZZLES MAIN
BURNER
NOZZLES PILOT
BURNER
“H”
G30
G20
G30
G20
G30
G20
G31
G31
G31
kW(P.C.I.)
N° x l.
1/100mm
1/100mm
1/100mm
1/100mm
mm
mm
13FG
11,5
1 x 13
120K
180L
20
35
20
10
13FGM
913FG
11,5
1 x 13
120K
180L
20
35
20
10
913FGM
213FG
23
2 x 13
120K
180L
20
35
20
10
213FGM
926FG
23
2 x 13
120K
180L
20
35
20
10
926FGM
17FG
16,5
1 x 17
120K
180L
20
35
20
10
17FGM
917FG
16,5
1 x 17
120K
180L
20
35
20
10
917FGM
217FG
33
2 x 17
120K
180L
20
35
20
10
217FGM
934FG
33
2 x 17
120K
180L
20
35
20
10
934FGM
207FG
12
2 x 8
120K
180L
20
35
20
10
207FGM
927FG
12
2 x 8
120K
180L
20
35
20
10
927FGM
