Bartscher 117910 Скачать руководство пользователя страница 68

Страница: 68 / 70

Cleaning and Maintenance

66 / 68

117910

Fireclay Brick

1. Remove the fully cooled fireclay brick from the baking chamber.

2. Carefully remove residues of burnt food, flour, crumbs, etc., using a scraper for

ceramic glass.

3. Use a damp cloth and fresh water to wipe of the food residues and burnt flour

from the fireclay brick.

ATTENTION!

Never wash the fireclay brick in a dishwasher.

Do not use any dish-washing cleaning agents nor chemical cleaning
agents.

Do not use a pressure washer.

Do not use metal wire brushes.

Appliance Door / Appliance Door Seal

1. At the end of each working day, the appliance door seal should be cleaned with

a soft, damp cloth.

ATTENTION!

Do not use any cleaning agents to clean the seal, as these may dissolve
the seal material.

2. Clean the appliance door from inside and outside with a soft, damp cloth and a

mild cleaning agent.

Control Panel

Regular cleaning of the control panel is necessary for good performance and good
visibility on the screen.

1. Clean the control panel only with a soft, slightly damp cloth.

ATTENTION!

Do not use any cleaning agents to clean the control panel.

Содержание 117910







































































Результаты поиска

Содержание 117910

Отзывы:

Похожие инструкции для 117910

Бренды по названию

Популярные бренды

Bartscher 117910, Оригинальное руководство пользователя

Результаты поиска

Содержание 117910

Отзывы:

Похожие инструкции для 117910

Бренды по названию

Популярные бренды