Bartscher 111678, Руководство пользователя, Страница: 56 / 113

EN
page 56
Type of Problem Possible Causes Cure
Objects are not properly
dried Not enough rinse aid. Increase dosage. Contact Technical Service.
The rack is not suitable for the
objects Use the suitable rack which gives the objects an inclined
position so that water can rinse away.
The washed items may have been
sitting in the wash chamber too
long. As soon as the cycle stops, remove the rack with objects
so that they can dry more quickly in the air.
Rinse water temperature too low Check the boiler temperature.
Surface of dishes and glasses too
rough or porous for material wear. Replace type of dishes and glasses used.
Streaks and spots on
objects. Too much rinse-aid chemical. Reduce the rinse aid amount. Contact Technical Service
Too hard water. Check the water quality. Water must not exceed 2-8°f in
hardness.
For appliances with softener: too
little salt in the salt container or
the resins have not been properly
regenerated. Fill the salt container (coarse salt: 1-4 mm grains) and
regenerate the resins more often. If lime deposits are also
observed on the body of the machine, have a quali
fi ed
technician check the operation of the water softener.
Salt present in dishwasher sump. Thoroughly clean and rinse the appliance, and avoid spilling
salt when fi lling the container.
The machine suddenly
stops during operation. The machine is connected to an
overload device. Contact Technical Service
A machine safety device was
triggered. Check the electrical devices (Contact Technical Service).
The washing pump doesn't
work The pump is blocked Contact Technical Service.
N.B.: For any other question, please contact your Service provider.
The manufacturer has right to modify any technical characteristics without prior notice.