Bartington Grad601, Руководство по эксплуатации

Страница: 15 / 61

BARTINGTON INSTRUMENTS
Page 15 of 61 OM1800/26
6. Connections
The functions of the sockets on the underside of the data logger are indicated in the label on the
front side of the instrument.
Caution: Only connect/disconnect the cable from data logger to sensors with the data
logger powered off. Not observing this may cause damage to the data logger.
Note:
If only one sensor is used, connect it to socket 1 on the rear of the data logger. If two
sensors are used, connect the sensor to the left of the operator to socket 1 and the one to
the right to socket 2.
Note: Ensure the battery lead to the data logger is connected.
Note:
The 9-way socket on the data logger is fitted with a replaceable gender changer to
greatly extend the operating life, and a protective cover which must be fitted at all times
except when downloading data.
Note:
Protective caps are provided for the sensor connectors and should always be fitted
when the connectors are not in use to minimise dirt ingress.
Figure 7b: DL601 Data Logger connections guide