APEX Pressurised Cabinet
Ex p Slot Printer
Technical data
Rev. 0
01-37A2-7D0002_Manual_Exp-Slot-Printer_20220221_0_en.docx
Page 53 of 60
Reservation: We reserve the right to make any technical changes, if we consider them as required. Any changes, errors and misprints do not constitute any grounds for damage claims.
10
Technical data
Parameter
Technical details
Product
Ex p slot printer
Type
07-3704-2222/900.
EU Type Examination Certificate
BVS 20 ATEX E 060 X
IECEx certification
IECEx BVS 20.0048X
ATEX marking
II 2G Ex pxb IIC T4 Gb
IECEx marking
Ex pxb IIC Gb
Operating ambient temperature
range
+5 °C to +40 °C @T4
Storage and transport
-25 °C to +60 °C
Humidity
5% bis 85%, non-condensing
Mains voltage AC (Variant)
100 Vac to 230 Vac, +/- 10%
Power consumption electronics
< 4 A
Max. Power consumption
< 50 W
Release relay K1
(Ex p control unit)
Release of power supply for integrated printer
Release relay
K2
(Ex p control unit)
Release of LAN interface
Signal relay K3 and K4
(Ex p control unit)
Potential-free, 1x changeover contact,
230 Vac @ 1 A, 24 Vdc @ 1 A
Pressure range
0 … 25 mbar
Purge time
< 10 minutes
Purge gas valve
Proportional
Connecting terminal “Ex e”
0.08 … 2.5 mm² (28 …12 AWG)
With wire end ferrule / plastic
collar
0.25 … 1,5 mm²
Connecting terminal “Ex i”
0.20 … 2.0 mm² (20 …14 AWG)
With wire end ferrule / plastic
collar
0.25 … 0.75 mm²
Housing material
Stainless steel V4A
Screwed cable glands
2x M20 nickel-plated brass (clamping range: 4 - 12 mm)
For power supply and LAN connection
Ingress Protection (IP) Rating
IP 4x in accordance with IEC/EN 60079-0
IP 44 in accordance with IEC/EN 60529
Dimensions
375 (W) x 380 (H) x 581 (D) mm
Weight
35 kg
