APEX Pressurised Cabinet
Ex p Slot Printer
Installation
Rev. 0
01-37A2-7D0002_Manual_Exp-Slot-Printer_20220221_0_en.docx
Page 21 of 60
Reservation: We reserve the right to make any technical changes, if we consider them as required. Any changes, errors and misprints do not constitute any grounds for damage claims.
5
Installation
Setting up
Place the Ex p slot printer at the intended location.
Slight unevenness can be compensated by means
of the locking feet.
Requirements with regards to the installation site
The following requirements in terms of the installation site must be observed for
the Ex p slot printer:
Compressed air supply, network connection and power supply must be
available within the immediate vicinity.
Floor space: A firm, level floor space of sufficient size and load-bearing
capacity is required for the printer at the selected installation location.
There must be sufficient space at the front to ensure that the printout can
be removed safely.
The right-hand side panel is designed as a door for refilling the print
media. Therefore, the right side should be freely accessible so that the
print media can be refilled easily.
The rear side should be accessible for any connection work.
