APEX Pressurised Cabinet
Ex p Slot Printer
Installation
Rev. 0
01-37A2-7D0002_Manual_Exp-Slot-Printer_20220221_0_en.docx
Page 27 of 60
Reservation: We reserve the right to make any technical changes, if we consider them as required. Any changes, errors and misprints do not constitute any grounds for damage claims.
Remove used ribbon
Remove the used ribbon from the take-up spindle each time you replace the
ribbon roll.
Remove used ribbon
1.
Pull the core with the used ribbon from the ribbon take-up spindle.
2.
Dispose of the used ribbon. You can reuse the empty core from the ribbon
supply spindle by placing it on the ribbon take-up spindle.
3.
Reload the ribbon. Follow the instructions in Chapter 5.3.1. Loading the
ribbon.
