APEX Pressurised Cabinet
Ex p Slot Printer
Safety
Rev. 0
01-37A2-7D0002_Manual_Exp-Slot-Printer_20220221_0_en.docx
Page 11 of 60
Reservation: We reserve the right to make any technical changes, if we consider them as required. Any changes, errors and misprints do not constitute any grounds for damage claims.
Warranty
WARNING
UNAUTHORIZED MODIFICATIONS AND/OR CHANGES TO THE
EX P SLOT PRINTER.
The explosion protection, as well as the stress and safety-oriented
construction and production shall no longer covered by the guarantee.
Before any changes and modifications to the device are carried out,
the manufacturer must be contacted in order to request a written
approval for these intended tasks.
Original and replacement wear parts must be exclusively used.
Assumption of guarantee services
The manufacturer assumes full guarantee only and exclusively
for spare parts that have been ordered from him.
In principle, our “General Terms and Conditions of Sale and Delivery” shall apply.
These shall be available to the operating company at the latest upon conclusion
of the contract. Any warranty and liability claims for personal injury and property
damage shall be excluded, if these can be linked to one or more of the following
causes:
Improper use of the Ex p slot printers.
Improper assembly, commissioning, operation and maintenance of the Ex
p slot printers.
Failure to observe the instructions in the “User’s Manual” regarding
transport, storage, assembly, commissioning, operation and maintenance.
Unauthorised structural changes to the Ex p slot printer.
Inadequate monitoring of parts that are subject to wear.
Any repairs have been carried out incorrectly!
Disasters caused by the effects of foreign bodies and force majeure.
We shall grant a guarantee period of one year from the date of delivery to the Bad
Mergentheim plant on the Ex p slot printer and its accessories.
This warranty shall cover all parts of the delivery and shall be limited to the free
replacement or repair of the defective parts in our Bad Mergentheim plant. For
this purpose, the packaging supplied must be kept, providing that this is
possible. Where required, the goods must be sent to us after agreeing the same
in writing. There shall be no right to a rectification of defects at the place of
installation.
