BCS36x8
ex
Series
Connection example
Type 17-A1S4-*HP* and B7-A2S4-****
Subject to technical changes.
05/2020
Page 59 of 78
12.1.3
Setting/programming
The programming barcodes have been taken from the original Zebra Product Reference Guide (PRG).
The functions of the BCS3608
ex
and BCS3678
ex
are based on the Zebra DS3608-HP/ER and
DS3678-HP/ER.
The Guide is available to download from Zebra or from BARTEC:
Zebra support download page:
https://www.zebra.com/us/en/support-downloads.html
-
Barcode Scanners
-
Ultra Rugged Scanners – DS3608-HP/DS3678-HP and DS3608-ER/DS3678-ER
BARTEC download page:
http://automation.bartec.de/indexE
-
Data capture
Function
Barcode
Set factory defaults
Scan the barcode for factory settings to remove all
customized defaults and set the digital scanner to factory
default settings (factory defaults can be found in the Zebra
PRG,
Appendix A, Standard Default Parameters).
Default settings
Hand-held scanner is set as HID device.
Default settings of the USB interface (virtual COM)
RS-232 host parameters
Baud rate:
9600 baud
Parity:
None
Stop bits:
1-bit
Data bits:
8-bit
Hardware handshaking: None
Software handshaking: None
USB functions only as SPP (Serial Port Profile), HID is not supported.
The supply module Ex i is detected by the host PC as a serial connection (virtual COM interface)
Further customized settings can be performed with the help of the Zebra Product Reference
Guide or the Zebra 123Scan utility.
Programming/setting via the Zebra 123 Scan Utility is not supported via the USM.
A programming cable is required.
