BCS36x8
ex
Series
Connection example
Type 17-A1S4-*HP* and B7-A2S4-****
Page 18 of 78
Subject to technical changes.
05/2020
Universal supply module –FTDI-FT232-R driver
Driver for the universal supply module (USM).
On connecting the USM, the drivers are automatically detected by the Windows operating
system and installed if necessary.
If not detected automatically, the driver can be downloaded from the BARTEC download page or
directly from the FTDI website (
https://www.ftdichip.com/
) and installed manually.
The driver is compatible with:
- Windows 10, 8.1, 8, 7 --- 32/64 bit
BARTEC download page:
http://automation.bartec.de/indexE.htm
Wiring of universal supply module – USB-SPP interface
PC/Host with USB Interface
USB-SPP = Serial Port Profile
USB = virtual serial COM port
Max. cable length is 5
m
UVM-corded
(e.g. 1st generation with DIP switch)
Wiring:
Blue wire
necessary (example connection to AC)
Green line
necessary
For data lines (green) we strongly recommend to use shielded (e.g. CAT5, similar or higher quality) cables.
The DIP switch is only populated in the 1
st
generation of the USM. From the 2
nd
generation
onwards, the interface is set via programming barcodes.
