Bartec BCS 160 Series, Руководство пользователя

Страница: 40 / 56

Commissioning
Barcode Hand Scanner
BCS 160
ex
Series, Types 17-21BA-M31S/…….. and 17-21BA-M32S/……..
34/48
Technical data subject to change without notice.
Revision A / Status: 01/2014
5.6.3 “IDM Set Up Tool” Configuration Software
Settings on the BCS 160
ex
series

By means of the "IDM Set Up Tool" configuration software from Sick.
The "IDM Set Up Tool" from Sick is configuration software for Windows operating
systems.
The software is available for downloading free of charge from Sick on the
www.sick.com
homepage.

With the Programming Manual from Sick.
The hand scanner can be programmed by scanning special programming barcodes from
the Programming Manual.
Comparison of the BARTEC types and the corresponding Sick types in the following table.
BARTEC Type Sick Type
BCS 160
ex
IDM 160
BCS 160
ex
BT IDM 160BT
System Requirements for the "IDM Set Up Tool"
Processor Standard Intel Pentium PC or compatible
Interface USB or serial interface
Operating system Windows 98, Windows 2000, Windows NT, Windows XP
Screen At least 256 colours - recommended 65,536 colours (16-bit high colour)
Minimum resolution 800 px x 600 px
For detailed information on the "IDM Set Up Tool", please refer to the documentation
from Sick.
5.6.4 Establishing the BCS 160
ex
BT Connection to the Base Station
The BCS 160
ex
BT offers various settings in order to communicate with the host system.
PAIR mode 1 bluetooth hand scanner is connected to a base station
PICO mode up to 7 Bluetooth hand scanners are connected to a base station
HID mode direct HID communication with the bluetooth host without a base station
SPP master-
slave mode
direct serial communication with bluetooth host without a base station
Detailed information and instructions on the functions can be found in the programming
manual from Sick for the IDM160 Bluetooth hand scanner.