Bartec BCS 160 Series, Руководство пользователя

Страница: 48 / 56

Malfunctioning and
Troubleshooting
Barcode Hand Scanner
BCS 160
ex
Series, Types 17-21BA-M31S/…….. and 17-21BA-M32S/……..
42/48
Technical data subject to change without notice.
Revision A / Status: 01/2014
Fault Possible cause Solution
−
No connection between the
connection cable and supply
module or to the host
−
Check and connect the cable.
Incorrect
transmission of
scanned data.
− The hand scanner was not
programmed to the correct
interface parameters. − Check the interface type.
− Set the interface parameters.
− Check or set barcode options.
Only BCS160
ex
BT Bluetooth hand scanner
Hand scanner does
not react
− Software error
− Reboot
− Switch off the voltage supply for the
base station or, if that is not possible,
disconnect the base station from the
supply module. Reconnect the
voltage supply then.
− Take the battery out of the hand
scanner and insert it again.
− Battery out of charge
−
Charge the hand scanner or the
battery.
−
No battery inserted
−
Insert a battery.
4 descending signal
tones are sounded.
−
Radio connection lost.
−
Reduce the range to the base station
in order to establish the radio
connection.
or
−
Activate the “Scanning outside the
range“ function.