Bartec BCS 160 Series, Руководство пользователя

Страница: 10 / 56

Basic Safety Instructions
Barcode Hand Scanner
BCS 160
ex
Series, Types 17-21BA-M31S/…….. and 17-21BA-M32S/……..
4/48
Technical data subject to change without notice.
Revision A / Status: 01/2014
1.6.2 Inspection
Under IEC 60079-19 and EN 60079-17, the owner/managing operator of electrical
installations in hazardous areas is obliged to have these installations checked by a
qualified electrician to ensure that they are in a proper condition.
1.6.3 Repairs
Repairs on explosion-protected operating equipment may be done only by authorised
persons working in accordance with the latest developments in technology and using
original spare parts. The applicable regulations must be observed.
1.6.4 Commissioning
Before commissioning, check that all components and documents are there.
1.7 Ex Protection Type, Certification and Standards
Markings specifying Ex protection and certification are put on the device. For Ex
protection markings, see Chapter 3 "Technical Data".
The barcode hand scanner series conform to Directive 94/9/EC for devices and protective
systems for use to their intended purpose in potentially explosive areas (ATEX Directive).
For the standards conformed to, see Chapter 3 "Technical Data".
1.8 Warranty
WARNING
No changes or conversions may be made without the manufacturer’s written
consent.
If components other than those specified are used, explosion protection will no longer
be assured. It cannot be guaranteed that parts procured from other suppliers have
been designed and manufactured in conformance to safety requirements and with the
necessary stress tolerance.

Contact the manufacturer and obtain his approval before performing any changes
or retrofits. Use only original spare and expendable parts.
The manufacturer grants complete warranty only and exclusively for the spare parts he
supplies.
Our “General Terms and Conditions of Sale and Delivery” apply as a basic rule. These
are made available to the owner / managing operator at the latest on conclusion of the
contract. Warranty and liability claims for personal injury and damage to property will be
inadmissible if they are attributable to one or more of the following reasons: