Barrus ShireZ Electric 6HP, Руководство оператора

Страница: 37 / 97

RDG603A74 - Issue 4 Page 37 of 97
3. Starting Procedure (Outboard motor with speed and direction control lever)
•
Ensure that the lever is in the neutral position.
•
Attach the safety lanyard to the control lever connected to the outboard ( Figure 30 ).
Figure 30: Safety Lanyard attached to control lever
•
Attach the other end of
the safety lanyard to the operator’s life jacket or leg.
The outboard will not operate if the safety lanyard is not mounted in its correct
location.
*Note: The lever must be installed to move the boat forwards when the lever is moved
forward.
•
Press the power button. The light on the button will illuminate green and the cooling
pump will switch on.
•
Press the locking safety button on top of the lever down.
•
Slowly push the speed and direction control lever in the direction required (forwards
or backwards) to start the outboard.
•
To increase the speed, move the speed and direction control lever further forwards.
Locking Safety Button
Safety Lanyard
Power (on/ off)
Switch