Barrus ShireZ Electric 6HP, Руководство оператора

Страница: 44 / 97

RDG603A74 - Issue 4 Page 44 of 97
SECTION 5
– Maintenance
NOTICE:
REFER TO THE BARRUS MANUAL PRIOR TO CARRYING OUT ANY MAINTENANCE
WORK.
WARNING:
PRIOR TO CARRYING OUT ANY SERVICE OR MAINTENANCE WORK MAKE SURE
THE RELEVANT PERSONAL PROTECTION EQUIPMENT IS WORN.
1. General
•
The person who is to carry out the maintenance of the outboard motor needs to have
the relevant mechanical and electrical competence to do so. If you do not have the
relevant skills or tools it is recommended that the maintenance is carried out by your
local dealer or qualified mechanic.
•
The maintenance may involve being in the proximity of moving, hot or electrical parts.
To reduce the risk of injury always make sure the motor is switched off and the battery
is disconnected.
•
If replacement parts are required always use genuine parts or parts of the equivalent
design and quality. A list of replacement parts is in Section 10 - Spare Parts. Please
contact your local dealer to order the replacement parts.
2. Removing propeller
•
Straighten the split pin and pull it out using a pair of pliers.
•
Remove the propeller nut, then the propeller can be removed.
Figure 40: Propeller Configuration
Description
1 Split Pin
2 Propeller Nut
3 Propeller
4 Thrust Washer