Barrus SHIRE 14 30 WB Скачать руководство пользователя страница 4

Страница: 4 / 40

RDG603A9 - Issue 1 - Shire 14 Workboat Owners Manual 30, 40, 50

Page 4 of 40

CONDITIONS THAT MUST BE MET IN ORDER TO OBTAIN WARRANTY COVERAGE

Warranty coverage is only available from an authorised dealer in the country in which the

sale occurred. Routine maintenance outlined in the Owners Manual must be performed

using genuine parts in order to maintain warranty coverage. If the customer performs

maintenance, Barrus reserves the right to make future warranty coverage possible only with

proof of proper maintenance.

WARRANTY CLAIMS

Warranty claims shall be made by an authorised dealer or boat builder.

The dealer or boat builder will then arrange for the inspection and any necessary repairs. If

the repairs carried out are not covered by the warranty, purchaser shall pay for all related

labour and material, and any other expenses associated with that service.

WHAT IS NOT COVERED

This limited warranty does not cover routine maintenance items, adjustments, normal wear

and tear, damage caused by abnormal use, operation of the product in a manner

inconsistent with the recommended operation/duty cycle section of the Owners Manual,

accident, submersion, improper installation (proper installation specification and techniques

are set forth in the Operations and First time running sections in this manual), use of an

accessory or part not manufactured or sold by us, or alteration or removal of parts.

Expenses related to crane-out, launch, towing, storage, telephone, rental, inconvenience,

slip fees, insurance coverage, loan payments, loss of time, loss of income, or any other

types of accidental or consequential damages are not covered by this warranty.

Failure to use John Deere approved oils and coolants will invalidate any warranty (Shire 90).

Engine electrical systems fitted with alternator boost charge systems or any other electrical

management systems other than those approved by Barrus are not covered by warranty.

Engine and fuel equipment is not covered by warranty if bio-diesel is used in the fuel system.

Also if no type of water trap is incorporated into fuel system.

Содержание SHIRE 14 30 WB









































Результаты поиска

Содержание SHIRE 14 30 WB

Отзывы:

Похожие инструкции для SHIRE 14 30 WB

Бренды по названию

Популярные бренды

Barrus SHIRE 14 30 WB, Руководство пользователя

Результаты поиска

Содержание SHIRE 14 30 WB

Отзывы:

Похожие инструкции для SHIRE 14 30 WB

Бренды по названию

Популярные бренды