Barrus SHIRE 14 30 WB, Руководство пользователя

Страница: 19 / 40

RDG603A9 - Issue 1 - Shire 14 Workboat Owners Manual 30, 40, 50 Page 19 of 40
SECTION 4 - Operation
1. Starting the Engine for the First Time

Remove ignition key
.

Ensure all oil and coolant levels are checked.

Ensure engine battery is connected. Battery master switch must be turned on.

Check all connections and mountings are tight.

Ensure that the raw water seacock is turned on.
2. Starting Procedure
Note: Shire engines do not have a cold start function as standard. Therefore the glow
plug light will not illuminate.

Ensure the gearshift control lever is set to neutral , and that persons are clear of any
moving parts.

Insert the ignition key and turn to the first position, on .

Observe warning lights (and gauges on deluxe panel). NB the engine overheat light
will only illuminate when the water temperature exceeds the safe level

Listen for warning buzzer.

Turn key to second position, start , and hold to crank.

Crank the engine for no more than 15 seconds.

On engine start, immediately release key.

Key will return to first position, on .

The warning buzzer will stop and on the deluxe panel the oil pressure gauge will show
an oil pressure of 3
– 4 bar [45-60 psi].

Should any warning light not go out, or if there is no reading on the oil pressure
gauge, the buzzer will continue sounding. In this case, stop the engine immediately
and check the relevant system (Note: if the charge light does not go out, rev the
engine briefly).

Once started check that sea water is coming out of the water cooled exhaust outlet in
the hull of the boat

Stop engine immediately if any abnormal noises are detected.

Visually check the engine for oil, fuel and coolant leaks, (after initial startup and at
regular intervals, N.B. engine must be stopped to carry out this check).