INSTALLATION INSTRUCTIONS
800.533.3948
•
www.barronltg.com
4
40070002 REV 1 10/14
FBTCJ-24V
MOUNTING
1. Suggested installation of FBTCJ-MC mounting clips is one every 8” for a straight run and as needed for a design.
Remember to never leave sections of the FBTCJ unsecured.
2. The FBTCJ-LCH Linear Channel is designed for end-to-end installation in a continuous line.
3. Both the FBTCJ-MC and the FBTCJ-LCH can be mounted with counter sink screws (Hardware field supplied).
Verify screws are completely tightened or they may cause the FBTCJ to bunch up during insertion.
4. Starting at the power feed end, gently start inserting the FBTCJ into the mounting. Do not twist, pull or kink the
product during installation.
5. Make sure the molded power connector is aligned with the orientation of the product. Do not pull or bend the
power cord in any direction.
6. After the product has been installed, energize for testing.
TROUBLE SHOOTING
Product will not light
• Verify that there is power to the receptacle feeding the product.
• Check the GFCI and see if it is tripped.
• Double check that the FBTCJ-FC power connector was installed into the product correctly.
• Check the transformer and ensure it has power.
Product does not light for the first 3”- 4”
• Product was cut incorrectly. It will be necessary to re-cut the product at the correct designated location and
reassembled.
Product has a dark section in the run.
• During installation, product was pulled, twisted, kinked and the interior circuitry was damaged. Either new product
will need to be cut, or the damaged section can be cut out and splice in a new section.
