17. Remove the battery compartment within the VEX EXIT sign. (Fig. 21)
18. Pass the power wires found within the battery compartment through the hole of the wire housing and make the
necessary connections with the wires from the J-box, according to the input voltage (120VAC or 277VAC). (Fig. 22)
Make electrical connections as follows:
Black - 120VAC
Orange - 277VAC
White - Common
Green - Ground
Note:
Cap unused leads to prevent shorting.
19. With the proper connections made, conceal the wires inside the J-box (all power supply wire connections need to
be made inside the J-box). Snap on battery compartment until the tabs are locked and secured to prevent
interference with the EXIT sign illumination. (Fig. 23 and 24)
INSTALLATION INSTRUCTIONS
800.533.3948 • www.barronltg.com
6
10070205 REV 2 - 09/18
21
22
23
24
VEX-8 NEMA
