27. Secure the lid by closing the two plastic latches. (Fig. 33)
28. Install tamper resistant screw through the slots located on the lid. (Fig. 33a)
29. Apply silicone to seal the enclosure against the mounting surface in order to prevent water from getting to the
J-box. (Fig. 34)
30. Now that the NEMA EXIT sign is installed, turn the power ON. Perform a test of the unit by depressing the illuminated
test button for 1 second, checking that the sign briefly flashes once. (Fig. 36)
INSTALLATION INSTRUCTIONS
800.533.3948 • www.barronltg.com
9
10070205 REV 2 - 09/18
VEX-8 NEMA
33
34
33a
35
36
Test button
