14. Pass the wires from the NEMA enclosure’s test button through the square hole on the side of the VEX fixture, making
sure to pass it through the right side of the mounting plate. (Fig. 17)
15. Pass the wires from the J-box through the center hole of the VEX EXIT sign. (Fig. 18)
16. Place the VEX EXIT sign on the mounting plate, making sure the sign sits behind the front lip of the mounting plate.
This will make it easier to make the wire connections. (Fig. 19 and 20)
INSTALLATION INSTRUCTIONS
800.533.3948 • www.barronltg.com
5
10070205 REV 2 - 09/18
17
18
19
20
VEX-8 NEMA
