20. Locate the battery wire coming from the battery compartment and plug the connector to the PCBA at the location
shown. (Fig. 25)
21. Locate the wire labeled “TEST” from the button wire harness and plug it into the PCBA connector associated with the
test button. This will be the connector on the right. (Fig. 26)
22. Now locate the wire labeled “AC ON” from the button wire harness and plug it onto the PCBA connector associated with
the LED. (Fig. 27) This will be the connector on the left.
23. The fixture is now completely wired. (Fig. 28)
INSTALLATION INSTRUCTIONS
800.533.3948 • www.barronltg.com
7
10070205 REV 2 - 09/18
25
26
28
VEX-8 NEMA
27
