Baroness LM3210A, Руководство по эксплуатации для владельца, Страница: 71 / 167

1
1
1 of 2
<
NEXT
>
HIDE
FMI 15
E x c e s s i v e P M 3
SPN 3701
C : 1
1 of 2
<
NEXT
> HIDE
FMI 15
C O R R E C T I V E A C T I O N :
S t a r t D P F P a r k e d
R e g e n e r a t i o n
i m m e d i a t e l y
SPN 3701
C : 1
2
2
27gtuu-006
Parked Regeneration_003
1 LED (yellow)
2 Arrow key
Stop traveling and cutting work.
Park this machine in a safe location.
Apply the parking brake.
Set the throttle opening to 0% (idling).
Press the DPF parked regeneration
switch.
Parked regeneration starts and the
regeneration icon changes from blinking to
lighting.
When the regeneration completed, the
regeneration icon disappears.
Manual Regeneration
Danger Danger
Since it will become extremely hot around the
exhaust outlet during DPF regeneration, do
not perform the regeneration in a location
where fires may occur.
2.
3.
4.
5.
6.
7.
￭
Important
When the system enters the level where DPF
regeneration is required, perform the
regeneration immediately.
Interrupting the regeneration or ignoring the
warning and continuing traveling or cutting
work may cause the engine and DPF to
malfunction.
Important
Manual regeneration can not be performed as
long as the DPF auto regeneration inhibit
switch set to the "Auto regeneration inhibit
mode".
Set it to the "Auto regeneration mode" to
perform regeneration.
Manual regeneration is the DPF
regeneration performed only by the expert
with the fault diagnostic tool. Normal
automatic regeneration or parked
regeneration can not complete regeneration
since large amount of PM accumulates.
Manual regeneration can be activated in any
PM accumulation level.
You can not continue to use this machine
for traveling and cutting work during DPF
regeneration.
You can not perform the regeneration.
(The fault diagnostic tool is required.)
Manual regeneration is activated in PM
accumulation "Level 4".
Manual regeneration is activated in any
PM accumulation level when the following
condition met.
when replacing DPF
when replacing ECU
･
･
･
･
1.
2.
Description of Functions
LM3210A
Description of Functions
Page 4-35
Engine