Baroness LM3210A, Руководство по эксплуатации для владельца, Страница: 51 / 167

No. Monitor display L Monitor display S Description
24
EXHAUST FILTER
OUTLET TEMP
EF OUT T
Displays the DPF outlet gas temperature measured by the
exhaust temperature sensor.
25
PARTICUATE TRAP
LAMP
PT LAMP
Shows the status of the regeneration icon.
Icon not displayed="OFF", Icon blinking="ON BLINK", Icon
solid="ON SOLID"
26 DPF STATUS DPF ST
Shows the status of the DPF.
DPF regeneration not needed="REGEN NOT NEEDED"
DPF regeneration needed=(Level 1="NEEDED LOWEST",
Level 2-3="NEEDED MODERATE", Level 4="NEEDED
HIGHEST")
27
DPF ACTIVE REGEN
STATUS
DPF AR ST
Shows the DPF regeneration status.
Regeneration not needed="INACTIVE", Regeneration
needed="NEEDED", Regenerating="ACTIVE"
28
DPF REGEN INHIBIT
STATUS
INHIBIT ST
Shows the ECU auto regeneration inhibited status.
Auto regeneration inhibit switch off="OFF", Auto regeneration
inhibit switch on="ON"
29
DPF REGENERATION
INHIBITED SW
DPF INHIB SW
Shows the status of auto regeneration inhibit switch.
Auto regeneration inhibit switch off="OFF", Auto regeneration
inhibit switch on="ON"
30
EXHAUST HIGH TEMP
LAMP
EXH T LAMP
Displays the condition of the exhaust temperature.
450 °C or more="ON", 450 °C or less="OFF"
31 %SOOT %SOOT
Displays the amount of soot accumulated in the DPF.
100
％＝ PM accumulation Level 1
32 MACHINE HOURS MACH HRS
Displays the total operating time of the machine (time that the
engine was actually running).
33 FUEL LEVEL FUEL LEVEL Displays the quantity of fuel remaining in the fuel tank.
Note:
When display settings are being specified, the parameters appear on "Monitor display L".
At all other times, the parameters appear on "Monitor display S".
Description of Functions
LM3210A
Description of Functions
Page 4-15
Monitor