Baroness LM3210A, Руководство по эксплуатации для владельца, Страница: 118 / 167

Select the hold position of the cover
adjustment plate and secure the reel cover.
Adjustment of CR Brush
Note:
Depending on the specifications, this function
may not be available.
Important
Pressing the brush against the roller too tightly
will cause the belt to slip or break.
Important
CR brush prevents clippings etc. from
adherence to the rear roller owing to rotating
brush.
Loosen the bolts and nuts attached to the
both ends of CR brush.
1
3
4
1
2
zp6tso-001
Adjustment of CR Brush_001
1 Bolts
2 Nuts
3 Brush
4 Rear roller
Securely tighten the loosened bolts and nuts
as the gap between the brush and rear roller
is adjusted to between 0 and 1.0 mm (0 -
0.039 in).
2.
1.
2.
Adjustment of Rear Scraper (Wire Type)
Note:
Depending on the specifications, this function
may not be available.
Important
Do not place the scraper in contact with the
rear roller too tightly.
It will cause the scraper break and slack.
The scraper prevents grass clippings, etc.,
from attaching to the rear roller.
Loosen the left and right lock nuts and nuts
of the scraper.
Tighten the nuts to stretch the wire.
The wire position is appropriate when the
distance between the scraper and the rear
roller is 2.0 to 3.0 mm (0.079 to 0.118 in).
Secure the position with the lock nuts.
Wire scraper
A
1
2
3 4
t4n31r-006
Adjustment of Rear Scraper (Wire Type)_001
1 Scraper
2 Rear roller
3 Nut
4 Lock nut
A 2.0 - 3.0 mm (0.079 - 0.118 in)
1.
2.
3.
･
LM3210A
Maintenance
Page 6-18
Adjustment and Replacement