Baroness LM3210A, Руководство по эксплуатации для владельца, Страница: 42 / 167

Reel Reverse Switch
Important
Do not switch the rotation directions, "Normal
rotation" or "Reverse" while the reel cutter
(cutting cylinder) is rotating.
Otherwise, a hydraulic system malfunction will
result.
Important
If the reel rotation switch is not set to the
"Rotation" position, the reel cutter (cutting
cylinder) will not rotate.
This is located under the hood.
This switches the rotation direction of the reel
cutter (cutting cylinder).
When the reel reverse switch is set to the
"Reverse" position, the reel cutters (cutting
cylinders) of all mower units rotate in reverse
(back lapping motion). When the reel reverse
switch is set to the "Normal rotation" position,
the reel cutters (cutting cylinders) rotate for
cutting.
1
A
B
kp6cmu-002
Reel Reverse Switch_001
1 Reel reverse switch
A Reverse
B Normal rotation
Reel Rotation/Stop Switching Lever
Caution
Before operating the reel rotation/stop
switching lever, be sure to set the reel rotation
switch to the "Stop" position.
The reel rotation/stop switching lever is located
on the reel motor attached to each mower unit. It
is used during cutting and back lapping.
You must shift only the lever(s) for the mower
unit(s) that you plan to use for cutting or back
lapping to the "Rotate" position. Leave the
lever(s) for other mower units in the "Stop"
position.
1
B
A
B
2f8equ-004
Reel Rotation/Stop Switching Lever_001
1 Reel rotation/stop switching lever
A Stop
B Rotate
Reel Rotation Adjustment Valve
These valves adjust the rotation speeds of the
reel cutters (cutting cylinders).
For mower units #1, #4 and #5
1
bczghz-005
Reel Rotation Adjustment Valve_001
1 Valve for mower units #1, #4 and #5
LM3210A
Description of Functions
Page 4-6
Reel Reverse Switch