28
28
29
Oil seal
Oil seal
1) Remove the outer drum shaft [4-15] by unscrewing the
four bolts [4-16] on each side.
* Secure the drum so that it doesn’t turn when loosening
the bolts.
2) Remove the stop rings [4-17] on both sides.
Separate the right from the left drum, and remove one
of them.
* If an adjustment shim is used, be careful not to lose it.
3) Pull out the intermediate drum shaft [4-24,34,40].
* Be careful not to lose the drum center collar.
4) Tap inside the drum using something like a round bar,
and remove the oil seal and bearing .
* If an adjustment shim is used, be careful not to lose it.
Outer drum shaft
Stop ring
Intermediate drum
shaft
Drum center collar
Oil seal
Bearing
[8] Disassembling / assembling the drum
