14
14
15
6) Hammer the oil seal [1-38] into the housing.
* The oil seal needs to be hammered deep inside while
paying attention to the direction of the housing and oil
seal.
7) Hammer the tapered bearing core [1-36] into the hous-
ing [1-58].
* Please make sure that the direction of the bearing is
parallel to the housing.
8) Hammer the oil seal [1-38] from the inside.
9) Hammer the tapered bearing core [1-36] from the out-
side.
* Please make sure that the outer bearing is going in
parallel to the housing.
10) Install the housing on the reel cutter [1-39,40,41,42,63,71]
while paying attention to the direction of the housing.
* Be careful not to damage the oil seal.
Oil seal
Housing
Tapered roller bearing
Tapered roller bearing
Oil seal
Oil seal
Tapered roller bearing
Oil seal side
Spline
Housing
Reel cutter
