20
20
21
5) Apply grease on the 33-tooth reel gear and 42-tooth
reel gear [1-46] , 36-tooth reel gear and 45-tooth reel
gear [6-54] and the lip surface of the oil seal on both
sides of the cover. Attach the left cover [6-89] as shown
in the illustration.
6) Secure the left cover [6-89] with the six bolts [6-2], one
bolt [6-94], six bolts [6-30].
* Please tighten the screws uniformly.
7) Attach the 10 special bolt 35 [1-47].
(Lock the reel by inserting a wooden hammer handle
into the reel cutter to prevent the reel from turning.)
Left cover
Bolt [6-94]
Bolt [6-30]
Bolt [6-2]
Reel cutter
10 special bolt 35
Reel cutter
Blade
4) To make sure that the newspaper is cut uniformly on
both sides of the cutter, loosen the blade adjusting nut
on the side where the newspaper is cut better by turn-
ing it slightly to “right” and adjust the side that doesn’t
cut well by turning the nut slightly to “left”.
* Be careful not to press the cutter and blade to each
other too hard.
