Baroness LM180E, Руководство по эксплуатации для владельца

Страница: 60 / 72

Reel Rotation Lever
Loosen the adjustment bolt, then change
the length of the rod.
Adjust the clearance between the rod-
tension metal fitting and the collar to be 7 -
8 mm (0.28 - 0.31 in), when the reel rotation
lever is engaged.
Tighten the adjustment bolt and make sure
that the collar is fixed securely.
5
1
A
4
3
2
l36w96-008
Reel Rotation Lever_001
1 Adjustment bolt
2 Rod
3 Reel rotation lever
4 Rod-tension metal fitting
5 Collar
A 7 - 8 mm (0.28 - 0.31 in)
Left and Right Mower Units
Belts are always stretched at a constant
tension by the springs.
Loosen the adjustment bolt, then adjust the
clearance between the collar and the
mower lifting arm to be 1 mm (0.04 in).
Tighten the adjustment bolt and make sure
that the collar is fixed securely.
1.
2.
3.
1.
2.
Follow the same steps to adjust the belts on
the mower unit on the opposite side.
1
4
A
3
2
l36w96-003
Left and Right Mower Units_001
1 Spring
2 Adjustment bolt
3 Collar
4 Mower lifting arm
A 1 mm (0.04 in)
Transmission
Loosen adjusting nut A.
Tighten adjusting nut B, then change the
length of the rod.
Adjust the belt tension so that the belt
slacks by approximately 10 mm (0.39 in)
when you press the middle of the belt with
your finger at 98 N (10 kgf).
Tighten adjusting nut A and make sure that
the rod is fixed securely.
A
2
1
3
l36w96-004
Transmission_001
1 Adjusting nut A
2 Adjusting nut B
3 Rod
A 10 mm (0.39 in)
3.
1.
2.
3.
4.
LM180E
Maintenance
Page 5-18
Maintenance Work