20
8-3 Fuel Gauge
● This indicates the quantity of fuel in
-
side the fuel tank. If the fuel gauge
indicates a level close to "E" (EMPTY),
supply fuel at your earliest conve-
nience.
● The fuel tank capacity is approximately
40 liters.
Do n
ot overfill the fuel tank. If fuel overflows during operation, a fire may
result.
8-4 Oil Pressure Lamp
● This lamp turns on when the key
switch is set to the "ON" position.
● This lamp turns off when the engine is
started and there is normal pressure
after oil starts circulating. If this lamp
turns on while the machine is being
operated, stop the engine immediately,
and then inspect the machine and per-
form any necessary maintenance.
チャージ
サーモスタート
エンジン油圧
Oil pressure lamp
8-5 Charge Lamp
● This lamp turns on when the key
switch is set to the "ON" position.
It turns off when the engine is started
and charges normally. If this lamp turns
on while the machine is being operat-
ed, stop the engine immediately, and
then inspect the machine and perform
any necessary maintenance.
9. Maintenance/Inspection of Parts
9-1 Replacement of Engine Oil
…
For details on handling the engine, please refer to the separate Engine
Handling Manual.
1
Change the oil after the first 50 hours of
operation, then every 100 hours of op-
eration. Change the oil filter cartridge at
the same time.
2
Remove the drain plug at the bottom of
the engine, and then drain the dirty oil.
The oil can be completely drained if it is
done while the engine is warm.
● Be sure to use engine oil that is classified as API Service Grade CF or
higher, with an SAE Viscosity that is appropriate for the operating en
-
vironment (ambient temperature).
●
Since the engine oil is extremely hot immediately after a long duration
of operation, removing the drain plug may cause burns. Therefore,
wait a short period of time before changing the oil.
Drain plug
チャージ
サーモスタート
エンジン油圧
Charge Lamp
