3
Purpose
This machine is intended for sweeping at golf courses.
Do not use this machine in any way other than its intended purpose, and do not
modify the machine.
Operating this machine for other purposes and modifying it may be very dangerous
and may cause damage to the machine.
In addition, this machine is not authorized for operation as a special motor vehicle.
Do not operate it on public roads.
Safety
Failure to adequately follow these safety precautions may cause an accident result-
ing in injury or death.
Safe Operating Practices
The following instructions include the ones from CEN standard EN 836: 1997, ISO
standard 5395:
1990, and ANSI B71.4-2004.
Training
1.Read this manual and other training material carefully. Be familiar with the con-
trols, safety signs, and the proper use of the equipment.
2.If the operator or mechanic can not read English it is the owner's responsibility to
explain this manual to them.
3.All operators and mechanics should seek and obtain professional and practical
instruction.
The owner is responsible for training the users.
Such instruction should emphasize.
[1]The need for care and concentration when working with ride-on machines.
[2]Control of a ride-on machine sliding on a slope will not be regained by the ap-
plication of the brake.
The main reasons for loss of control are
-Insufficient wheel grip
-Being driven too fast
-Inadequate braking
-The type of machine is unsuitable for its task
-Lack of awareness of the effect of ground conditions, especially slopes
-Incorrect hitching and load distribution
4.Never allow children or people unfamiliar with these instructions to use or service
the machine.
Local regulations may restrict the age of the operator.
5.The owner/use can prevent and is responsible for accidents or injuries occurring
to themselves, other people, or property.
6.Keep in mind that the owner, operator, and mechanic are responsible for acci-
dents or hazards occurring to other people or their property.
Preparation
1.Evaluate the terrain to determine what accessories and attachments are needed
to properly and safety perform the job.
Only use accessories and attachments approved by the manufacturer.
2.While operating, always wear substantial footwear, long trousers, hard hat, safe-
ty glasses, and ear protection.
Long hair, loose clothing, or jewelry may get tangled in moving parts.
Do not operate the equipment when barefoot or wearing open sandals.
3.Inspect the area where the equipment is to be used and remove all objects such
as rocks, toys and wire which can be thrown by the machine.
4.Exercise care in the handling of fuel.
[1]Store fuel in containers specifically designed for this purpose.
[2]Add fuel before starting the engine.
Never remove the cap of the fuel tank or add fuel while the engine is running
or when the engine is hot.
[3]Refuel outdoors only and do not smoke while refueling.
[4]If fuel is spilled, do not attempt to start the engine but move the machine
away from the area of spillage and avoid creating any source of ignition until
petrol vapours have dissipated.
[5]Replace all fuel tanks and container caps securely.
This machine is designed to ensure safe operation and has been tested and in-
spected thoroughly before shipment from the factory.
The machine is equipped with safety devices to prevent accidents.
However, whether the machine demonstrates its original performance level de-
pends on the manner in which it is operated and handled, as well as the man-
ner in which it is managed on a daily basis.
Inappropriate use or management of the machine may result in injury or death.
Observe the following safety instructions to ensure safe operation.
Warning-Fuel is highly flammable.
Take the following precautions.
