14
Operation
SHKA2000, SHKA2000-1CE
Please refer to page 8 for control panel reference.
Power Switch
1. Depress top portion of power switch to turn on
shaker.
2. Depress bottom portion of power switch to turn
off shaker.
Speed Control and Display
1. Slowly rotate the knob on the solid-state speed
control clockwise to increase speed and coun-
terclockwise to decrease speed. The markings
on the outside of the dial are for reference pur-
poses only.
2. The speed control tachometer provides an ana-
log readout of the actual platform rotation speed
up to a maximum of 400 rpm.
Time(r)
1. From the 12 o’clock off position, rotate timer
knob counterclockwise to the ON position to ini-
tiate continuous operation.
2. For timed operation, rotate timer knob clockwise
from 1 minute to 60 minutes. The markings on
the side of the dial are in 5-minute increments.
Caution
It is recommended that shaking
action be started at a low speed in
order to check that all vessels are
secure and that no spilling of
contents will occur.
Warning
Do not use shaker to mix flammable
materials or where the transfer of
mechanical energy to glass could
cause glass breakage.
Note
Shaker will not operate if the timer is
in the off position.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
