O
PERATION
16
6.
Use the UP or DOWN arrow keys to set the
shaker speed to match the tachometer’s read-
out.
7.
Press STOP key to enter the new speed value.
8.
Press START key to exit the calibration mode.
Setting Timer for Timed Shaking
1.
Press TIMER/ELAPSED membrane switch until
TIMER and SET TIME lights are illuminated.
The HOURS or MINUTES light will also light up
at this point depending on which option was pre-
viously chosen.
2.
Press HOURS/MINUTES membrane switch for
desired timing mode.
3.
Hold down appropriate arrow membrane switch
in the TIME module of the control panel, up or
down, until desired timing cycle is set from 0.1
hour up to 999 hours, or from 0.1 minute to 999
minutes depending on which timing mode is
chosen. SET TIME light will illuminate.
4.
Press START to begin timed shaking countdown
will begin from time set. TIMER and MINUTES
or HOURS lights will illuminate and timer will
count down from time selected. An audible
alarm will sound at the end of the timing cycle
and platform rotation will cease.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
