17
Remote Dispenser Wall Bracket Mounting
1.
Determine location of bracket in relation to
EASYpure II UV. Using the wall bracket as a tem-
plate, locate and drill the mounting holes in the
wall. Install appropriate fasteners (customer sup-
plied) into wall.
2.
Slide bracket onto fasteners and secure
3.
Mount dispenser onto bracket as shown.
Water Service Connections
Feed Water
1.
Locate the length of 3/8” O.D. tubing provided
with a quick disconnect insert on one end and a
3/8” O.D. X 1/4 NPT tubing adapter on the other.
2.
Install the tubing adapter into your incoming
water line. We recommend a customer supplied
shut off valve be installed in your feed water line.
Do not connect the feedwater to your EASYpure
II UV until you are told to do so. (See
Air Purge
section.)
I
NSTALLATION
Fuse Holder
Power Entry Module
Cord Socket
Optional Remote
Dispenser Connections
Feedwater Inlet
Note
Ensure there are no kinks in the tub-
ing that could restrict water flow.
Figure 9: External Unit Connections
Customer supplied fasteners
Figure 8: Remote Wall Bracket Mounting
Caution
Do not connect feed water until direct-
ed to do so during the
Air Purge
sec-
tion.
