26
2. Press ENTER button if the display is on User’s
function 2, or press (2) and ENTER buttons if
the display is on User’s function: 1. The display
should become:
3. The checking at 000.0 nm is in process.
4. If the wavelength is checked OK, the display
should show.
Then, press ESC button to quit, and the system
will return to test mode.
5. If the wavelength is checked not in specifica-
tion, the display should show:
6. Press SHIFT and ESC buttons simultaneously
to re-align the wavelength at 000.0 nm. The
display should show as below when the re-
alignment is in process. Then, the system will
return to test mode.
W
AVELENGTH
C
HECK
000.0
NM
C
HECKING
O
PERATION
W
AVELENGTH
CHECK
C
HECK
P
ASS
W
AVELENGTH
C
HECK
C
HECK
E
RROR
SP-870
** CALIBRATION**
