10
Keyboard
1. FUNC
A. F0: Standby Mode
B. F1: ID number setting
C. F2: Wavelength Check
2. 100%T/OA - Sets the instruments to 100%
Transmittance or Zero Absorbance.
3. PRINT - Directs the output to RS-232C and
Printer interface. (*See dip switch setting on the
rear panel in the enclosed appendix.)
4.
λλλλλ
nm - Sets desired wavelength.
5. A - Selects Absorbance mode.
6. T - Selects Transmittance mode.
7. C - Selects Concentration mode.
8. F - Selects Factor mode.
9. SHIFT + Any Arrow Key - Searches memory
mode in memory setting or reading.
10. SHIFT + C - Enters memory reading.
11. SHIFT+ F - Enters memory setting.
12. ESC - Clear input or quit operation mode.
13. 0-9 - Numerical value.
14. . - Decimal point
15. ENTER - Enters the keyed in numerical
values into the system.
I
NTRODUCTION
