Barnstead International Thermolyne 859 Series, Руководство по обслуживанию

Страница: 89 / 118

12. Remove blanket insulation (JC1087X7)
13. Remove insulation material (JC1087X4)
14. Remove afterburner element (EL1087X1)
15. Remove the filter (FL859X2)
16. Remove insulation material (JC1087X4)
17. Remove metal brace (BC1087X13)
18. Open chamber door
19. Remove top element (slide/pull out of chamber
from the front) (EL1087X3)
20. Remove both side elements (slide/pull out of
chamber from the front) (EL859X3 & EL859X4)
21. Remove the bottom element (slide/pull out of
the chamber from the front) (EL1087X2)
22. Remove the back wall ceramic piece (PH412X1)
23. Remove the back wall insulation piece
(JC1087X3)
Install the replacement JC1087X3 (position into place).
By following the procedure to remove the JC1087X3 in
the reverse order, the NCAT can be put back together.
Heating Elements
A) Heating Elements (Quick & Simple Test)
**This test must be preformed with the chamber at room
(ambient) temperature.
Equipment needed:
- None
1) Power up the NCAT unit.
2) Allow the NCAT to step through the startup
countdown and go into the preheat mode. Note
89
E
QUIPMENT
T
EST
P
ROCEDURE
Note
Refer to the pictures and parts list in
the back of this manual.