Barnett Engineering ProTalk Plus B1290, Руководство по эксплуатации, Страница: 56 / 82

B1290: Enter Configuration Code
YOU:
2**
Select Using Directory
B1290: Alarm One is Directory...
YOU:
1**
Select Directory A
B1290: Alarm One is Directory A
YOU:
**
Next
B1290: Alarm Two is Directory...
YOU:
1**
Select Directory A
B1290: Alarm Two is Directory A
YOU:
**
Next
B1290: Alarm Three is Directory A
YOU:
2**
Select Directory B
B1290: Alarm Three is Directory B
B1290: Alarm Four is Directory A
YOU:
2**
Select Directory B
B1290: Alarm Four is Directory B
YOU:
#**
Quit
The B1290 is now programmed to dial Directory A when alarms 1 or 2 oc-
cur, and Directory B when alarms 3 or 4 occur.
Example 4: Actuating Relays
In this example, when you receive the alarm “High Pressure” from the
B1290, you would like to be able to operate a bypass valve for up to ten min-
utes. The valve can be controlled by one of the relays on the B1290 using Re-
lay On and Relay Off codes.
B1290: Enter Program Code
YOU:
1**
Select Voices
B1290: Enter Voice Code
YOU:
2**
Select Relay Voices
B1290: Relay One is...
YOU:
2**
Change
B1290: beep-beep
55 Programming Examples