Barnett Engineering ProTalk Plus B1290, Руководство по эксплуатации, Страница: 47 / 82

3. Operation Codes
These parameters control how the unit operates. When one of these codes
is received, the B1290 performs the required function.
Acknowledge Code (Program Code 3.1)
Access Code (Program Code 3.2)
Interrogate Code (Program Code 3.6)
Remote Alarm Input Code (Program Code 3.5)
Directory Control Code (Program Code 3.7)
4. Relay Control
The parameters required to control a relay are listed here. You may use any
number of relays, but the ON/OFF input codes, voice message and relay
ON time must be programmed for each relay used. The relay voice code en-
ables or disables the voice confirmation for all relays.
Relay ON/OFF Control Codes (Program Code 3.3)
Record Relay Voices (Program Code 1.2)
Relay Timer Timebase (Program Code 5.3)
Relay On Time (Program Code 5.3)
Relay Voice (Program Code 6)
Relay Special Functions (Program Code 5.3)
5. Telephone Specific Parameters
This section describes the parameters used when the unit is required to
transmit alarms or signaling over the telephone system.
Using Directory (Program Code 5.2)
Directory Telephone Numbers (Program Code 2)
Access Code (Program Code 3.2)
Rings Before Answering (Program Code 4)
Dial Format (Program Code 6)
6. Radio Specific Parameters
These parameters control the operation of the unit when it is connected to a
two-way radio. Refer to the installation section in Getting Started for the re-
quired connections to the radio.
Using Directory (Program Code 5.2)
Directory Radio Command (Program Code 2)
46 Programming Reference