Barnett Engineering ProTalk Plus B1290, Руководство по эксплуатации, Страница: 31 / 82

2
ÞÞ
: Record Relay Voices
Record the voice messages associated with each relay. Note that the mes-
sages will only be announced if the relays have been programmed to oper-
ate from a string (see Program Code 3, Relay On/Off Codes). When a relay
is operated, the B1290 will speak the voice message followed by the word
“On” or “Off” to verify that the action was taken.
In some applications, it is not necessary to have voice confirmation when a
relay is operated. To disable this feature, refer to Program Code 6 - Relay
Voices.
The B1290 will always announce the condition of the relays when it is called
up or interrogated for status.
B1290: Relay Number One is ...
YOU:
2**
Record
YOU:
#**
Quit
**
Enter/Next
Default: empty
3
ÞÞ
: Erase All Voices
B1290: Enter Voice Empty Code
YOU:
#31**
Erase (exit with any other entry)
1290: Voice is Empty
**
Enter/Next
Program Code 2
ÞÞ
: Directories
There are four directories in the B1290. To allow different alarms to per-
form different actions when they are active, each alarm can be selected to
use any one of the directories. Each directory defines a unique sequence of
actions. There is also a Directory Control Code that modifies the directory
selection that the alarms are programmed for. When this code is used there
are restrictions placed on how the alarms are assigned to directories. There
are three possible ways that the directories can be used.
1. If there is No Directory Control Code:
Alarms can be assigned to any of the four directories and will always
use the one that has been assigned.
2. If there is a Directory Control Code (method 1):
Alarms can only be assigned Directory A. When the Directory Con-
trol Code is received, the directory usage is modified such that the
alarms now use the next directory with commands in it. If Directory
30 Program Codes