Barnett Engineering ProTalk Plus B1290, Руководство по эксплуатации, Страница: 35 / 82

B1290: Enter DTMF Code
YOU:
1**
Acknowledge Code
2**
Access Code
3**
Relay On/Off Codes
4**
Alarm On/Off Codes
5**
Remote Alarm Input Codes
6**
Interrogate Code
7**
Directory Control Code
**
Exit to Enter Program Code prompt
1
ÞÞ
: Acknowledge Code
The Acknowledge Code is sent by the called party to indicate that the alarm
message has been received. This stops the calling sequence of the B1290.
B1290: Acknowledge Code is ...
YOU:
X**
( x = 1 to 8 DTMF digits )
Default: 1234
2
ÞÞ
: Access Code
The Access Code is used as a password to prevent unauthorized callers
from altering the programming of the B1290. If an Access Code has been
programmed, it must be entered before a telephone caller will receive the
Enter Program Code prompt. The Access Code is not required for local pro-
gramming.
B1290: Access Code is ...
YOU:
X**
( x = 1 to 8 DTMF digits, # = clear )
Default: empty
3
ÞÞ
: Relay On/Off Input Codes
The relay codes allow users to perform remote control functions at the un-
attended site. Callers can operate relays on the B1290 by sending DTMF
codes from their telephone or radio keypads. Each relay has one code to
turn it on and a separate code to turn it off. When a relay is operated, the
B1290 speaks a voice message associated with that relay followed by the
word “On” or “Off” (see Program Code 1 - Record Relay Voices).
34 Program Codes