page 4
page 4
page 4
page 4
page 4
275B SER
800-00152
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
Your Barko Loader has been designed and manufactured with high quality materials and care in workmanship.
This manual is intended as a permanent reference to aid professional operator's in their work, and should be
available for use at any time. If the loader is not equipped with this manual, ask your supervisor to obtain one
for you.
Understand the correct servicing procedures before servicing the loader. It is important to know the correct
operating and servicing procedures of the loader and all safety precautions to prevent the possibility of property
damage and/or personal injury or death.
As a professional, trained operator, you are responsible for safety, both your own and that of your co-workers.
Your knowledge and use of all safety practices and correct servicing procedures in this manual, and your good
judgement, can be a major factor in preventing some of the thousands of injuries and deaths caused by
industrial accidents each year.
A professional operator should also be familiar with the information contained in other applicable sources such
as American National Standards, SAE, OSHA, etc.
ADDITIONAL INFORMATION:
Logging Safety Resource Guide (APA, 95-A-1) is available from the American Pulpwood Association. This
guide lists sources of videotapes, slide programs, movies, and publications on various aspects of logging
safety.
DON'T FORGET - SAFETY FIRST!
DON'T FORGET - SAFETY FIRST!
DON'T FORGET - SAFETY FIRST!
DON'T FORGET - SAFETY FIRST!
DON'T FORGET - SAFETY FIRST!
Loader
Model No.
Serial No.
The Loader serial number plate is located on the
pedestal.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: Information in this manual is current at the time of printing. Barko Hydraulics reserves the right to make
changes and improvements to it's products and manuals at any time without notice or obligation.
REFERENCE
REFERENCE
REFERENCE
REFERENCE
REFERENCE
INFORMATION
INFORMATION
INFORMATION
INFORMATION
INFORMATION
All requests for information, service or spare parts
should include loader serial number. For more
information contact:
Barko Hydraulics,LLC
P.O. Box 16227
One Banks Avenue
Duluth, MN 55816
Phone: 715-392-5641
Fax:
715-392-3931
Website: www.barko.com
Email: [email protected]
