![background image](http://html.mh-extra.com/html/barco/xdm/xdm_installation-manual_474400057.webp)
57
R5914477 /00
XDM
4.7 Installation of a lens on a B-Lens holder
Take into account that when using an XDM projector with a B-lens holder, you will also need the
optical adapter for the B-lens holder, which is provided with the projector. If the optical adapter is not
used, it will not be possible to achieve a perfect focus on your projected image.
Take into account the limited range of available lenses for an XDM projector with a B-lens holder.
For the full list of available lenses, refer to
, page 39
.
Why use the optical adapter?
In order to reuse as many older lenses as possible on this new generation of projectors, a secondary lens
holder has been created for the XDM projector. This B-Lens holder has been designed to reuse lenses from
the legacy B-Series cinema projectors. But in order to do obtain a correctly focused image, you will also
require an optical adapter. This adapter is included with all projectors with B-Lens holder.
While the adapter does not lock onto the lens barrel, it is held in place by tightening the screw of the clamping
ring.
CAUTION:
Make sure you have removed the lens cap from the lens before mounting the optical
adapter.
Required tools
Torque wrench with hex bits
Required parts
•
Optical adapter for B-Lens holder
•
Ring 1 or 2 for the optical adapter (depending on the used lens)
•
3 M3 Screw inserts (in case ring 1 is used)
•
3 M3x5 hex screw (in case ring 1 is used)
•
3 M4 screw inserts (in case ring 2 is used)
•
3 M4x8 hex screws (in case ring 2 is used)
Preparing a B-series lens for installation on a B-lens holder
1.
Check the list of the position of the optical adapter for B-Series lenses to see which adapter ring to use for
your lens. For more info, see
Position of the optical adapter for the B-lens holder
, page 94
.
2.
Place the appropriate adapter ring (ring 1 or ring 2) on the back of the lens.
Tip:
Pay attention to the orientation of the ring while mounting it . Make sure the bottom of the
printed number and the pins point outwards (reference 1,
Also pay attention to the lips of the adapter ring (reference 2,
). They need to snap in
place and will prevent the ring from falling off. Be careful not to break these while mounting the
ring.
Содержание XDM
