![background image](http://html1.mh-extra.com/html/barco/wepresent-wipg-1600/wepresent-wipg-1600_user-manual_4058014026.webp)
24
© wePresent 2017
WIPG-1600-USER-GUIDE-01
Web Management
7
< Concurrent AP and Station Mode>
Access Point
•
SSID: The default SSID can be changed, and the maximum Length is 32 bytes
•
SSID Broadcast: The default value is “Enable”
•
Channel: A fixed channel or auto selection can be selected. The “Auto” selection
means after powering on the WiPG-1600, all wireless channels will be scanned and
one clear channel automatically selected
•
Encryption: Select “Disable” or one of WEP/WPA PSK/WPA2 PSK/ WPA Enterprise/
WPA2 Enterprise
•
Key: If Encryption is enabled, a key must be entered according to the encryption
mode selected. (If the length of the key entered is not sufficient or too long, a warning
message will appear.)
•
Channel Bandwidth: select from 20M or Auto (20M/40M)
WiFi Station:
•
Connect to Existing AP: The default setting is “Disable”. If “Enable” is selected,
existing AP SSID must be entered, and the following information must be entered
accordingly to the existing AP setting:
Encryption:
Select “Disable” or one of WEP/WPA PSK/WPA2 PSK/ WPA Enterprise/
WPA2 Enterprise.
Key:
If Encryption is enabled, a key must be entered according to the encryption
mode selected. (If the length of the key entered is not sufficient or too long, a
warning message will appear.)
Note:
The Encryption and Key information must be consistent to the exiting AP
configuration.
<Apply >
: Press “Apply” button after configuration, and follow the reboot instruction
when applicable.
<Cancel>:
Press button to abort action.