![background image](http://html1.mh-extra.com/html/barco/wepresent-wipg-1600/wepresent-wipg-1600_user-manual_4058014025.webp)
23
© wePresent 2017
WIPG-1600-USER-GUIDE-01
Web Management
7
•
Key: If Encryption is enabled, a key must be entered according to the encryption
mode selected. (If the length of the key entered is not sufficient or too long, a warning
message will pop up.)
•
Channel Bandwidth: select from 20M or Auto (20M/40M)
< Station Mode>
Connect to Existing AP: The default setting is “Disable”. If “Enable” is chosen, enter
the existing AP SSID that you want to connect. When “Enable” option is selected, the
following information needs to be entered accordingly to the existing AP setting:
Encryption:
Select “Disable” or one of WEP/WPA PSK/WPA2 PSK/ WPA Enterprise/
WPA2 Enterprise.
Key:
If Encryption is enabled, enter a key according to the encryption mode selected.
(If the length of the key entered is not sufficient or too long, a warning message will
pop up.)
Note:
The Encryption and Key information must be consistent to the exiting
AP configuration.