![background image](http://html1.mh-extra.com/html/barco/slm-r12-plus/slm-r12-plus_service-manual_4253192050.webp)
8. Local Keypad & LCD Display
Info Display
LCD Display
Error Description
- L
ERROR(-2001)
MAINS VOLTAGE TOO LOW
Mains voltage lower than minimum specified mains voltage.
- L
ERROR(-2002)
LAMP START FAILED
Unable to start the lamp.
- L
ERROR(-2003)
MAINS VOLTAGE TOO HIGH
Mains voltage higher than maximum specified mains voltage.
- L
ERROR(-2004)
LAMP GONE OUT
Lamp shut down, unknown error
- L
ERROR(-2040)
MAINS ERROR FROM LPS
There is no mains supply from LPS to SMPS
- L
ERROR(-2101)
LAMP POWER SUPPLY
LPS with I
2
C slave address 0x20: Fuse F100 is blown.
- L
ERROR(-2104)
LAMP POWER SUPPLY
LPS with I
2
C slave address 0x20: Mains voltage too low; must be
>180Vrms.
- L
ERROR(-2124)
LAMP POWER SUPPLY
LPS with I
2
C slave address 0x20: Error in LPS power circuits.
- L
ERROR(-21xx)
LAMP POWER SUPPLY
LPS with I
2
C slave address 0x20: Unknown LPS error
- L
ERROR(-2201)
START PC NOT OK
LPS with I
2
C slave address 0x20: Start-up of the PFC module failed.
- L
ERROR(-2202)
START LPS NOT OK
LPS with I
2
C slave address 0x20: Start-up of the LPS module failed.
- L
ERROR(-2203)
START BOOST NOT OK
LPS with I
2
C slave address 0x20: Start-up of the BOOST module failed.
- L
ERROR(-2206)
LAMP IGNITION FAILED
LPS with I
2
C slave address 0x20: Ignition of the lamp failed.
- L
ERROR(-2207)
LAMP VOLTAGE OUT RANGE
LPS with I
2
C slave address 0x20: The voltage at the lamp is too high.
- L
ERROR(-2208)
LAMP POWER OUT RANGE
LPS with I
2
C slave address 0x20: The power at the lamp is too high.
- L
ERROR(-2209)
OVERTEMP IN LPS
LPS with I
2
C slave address 0x20: Temperature in LPS is too high.
- L
ERROR(-2210)
HTSNK OVERTEMP LPS
LPS with I
2
C slave address 0x20: Heatsink temperature in LPS is too
high.
- L
ERROR(-2211)
AMBIENT OVERTEMP LPS
LPS with I
2
C slave address 0x20: Ambient Temperature in LPS is too
high.
- L
ERROR(-2212)
FAN ERROR LPS
LPS with I
2
C slave address 0x20: Fan error.
- L
ERROR(-2401)
LAMP POWER SUPPLY
LPS with I
2
C slave address 0x22: Fuse F100 has blown up.
48
R5976820 SLM R12+ PERFORMER 08/03/2005
Содержание SLM R12 Plus
