![background image](http://html1.mh-extra.com/html/barco/slm-r12-plus/slm-r12-plus_service-manual_4253192068.webp)
9. Communication Module R763768
Info
Display
Error
Error Description
E 1
Formatter ERROR
Indicates an error concerning the formatter. This can be:
•
No I2C communication (no acknowledge) with the formatter board
•
Formatter error (see menu "SERVICE/DIAGNOSIS/FORMAT-
TER")
E 2
I
2
C Panellink Out
No I
2
C communication (no acknowledge) with Panellink Out EEPROM.
E 3
I
2
C AD9887
No I
2
C communication (no acknowledge) with device AD9887 on input
selector slot 1 and 2.
E 4
I
2
C Video Input
No I
2
C communication (no acknowledge) with video input on slot 3
and 4.
E 5
I
2
C Decoder
No I
2
C communication (no acknowledge) with decoder.
E c
I
2
C SCL Line
The I
2
C SCL line doesn’t react (held low), so no I
2
C communication
is possible.
E d
I
2
C SDA Line
The I
2
C SDA line doesn’t react (held low), so no I2C communication
is possible.
E L
LPS down, reduced power
At least one LPS gone down. The projector continues with reduced
power.
F 2
I
2
C Motor Driver
No I
2
C communication (no acknowledge) with motor driver.
F 4
CPU Flash read
F 5
CPU Flash write
F 6
CPU Flash clear
F 7
CPU Flash format
F 8
CPU Flash command busy
F 9
CPU Flash command time out
H 0
COMM PORT TX Busy
The TX-Line of the COMM PORT is still busy when a new transmission
has to take place.
H 1
COMM PORT RX Timeout
The slave device connected to the COMM PORT didn’t respond after
a request sent by the projector.
H 2
COMM PORT RX Data
The slave device connected to the COMM PORT sent an unknown
answer after a request sent by the projector.
H 3
COMM PORT RX Error
The slave device connected to the COMM PORT answered with the
"RX error byte" after a request sent by the projector.
H 4
COMM PORT Source Number
The projector tries to send a wrong source selection request to the
slave device connected to the COMM PORT.
H 5
COMM PORT TX Timeout
The projector is unable to send a command to the slave device
connected to the COMM PORT (transmission failure).
66
R5976820 SLM R12+ PERFORMER 08/03/2005
Содержание SLM R12 Plus
