Barco RLM G5i Performer R9010320, Руководство пользователя

Страница: 23 / 150

3. Connections
Component Video signals (PR/Y/PB)
Some interfaces use progressive output signals with a double line frequency of 32 kHz. The video decoder
used for the video signals is not appropriate for these signals since it can only handle 15 kHz signals. This
signal has therefore to be internally redirected, this is done in the
Source selection
menu by selecting
Data on
BNC’s
instead of
Component video
and by selecting
Pr/Y/Pb
in the advanced settings of the
Image file
menu.
3.4 Composite Video Input
Input specifications
The Composite video input section is made of 1 BNC input terminal. Connect Composite video signals from a VCR, OFF air signal
decoder, etc..
1.0 Vpp ± 3dB
75 Ω terminated
No loop through
TWO WAY
HARDWIRED REMOTE
2 1
3
PUSH
R/PR
G/Y B/PB Hs/Cs Vs VIDEO
SDI IN SDI OUT
S-VIDEO
R.C.
10 BASE-T
DVI ANALOG RGB RS 232/422 IN
POWER WIRELESS
RECEIVER
RS 232/422 OUT
Image 3-4
Composite Video indication
How to select a Composite Video Input ?
1. Press 3 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu.
The projector allows the input of more composite video signals (up to 7 composite video signals) when using
the 5 cable input in extended configuration. Press 3 to browse through the possible video sources.
R5976815 RLM G5I PERFORMER 02/06/2006 21